Print PDF
Favorite
Email
Step 2Transfer the Iron-on
If you are doing this in power point, go to print, then properties, and select specialty paper-transfer paper. be sure to put in the iron on paper upside down and to flip the image if needed.
now print it out...
assuming that it printed out right, follow the instructions in the transfer to get your iron ready, trim it, iron the hoodie, etc. now iron on the separate parts .
i did the hood first, to get it over with. be sure to iron really well around the crease in the middle.
The paws are a lot easier, except make sure you know which side will end up on the inside.
now print it out...
assuming that it printed out right, follow the instructions in the transfer to get your iron ready, trim it, iron the hoodie, etc. now iron on the separate parts .
i did the hood first, to get it over with. be sure to iron really well around the crease in the middle.
The paws are a lot easier, except make sure you know which side will end up on the inside.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
