Introduction: Panner With Arduino

This project it’s a new time-lapse tripod or panning with two axis that works with an arduino protoboard.

Everyone will be able to create their own time-lapse trajectory without need to check it. With the arduino code we’ll can change the value for the movement degrees that we want.

Step 1: Bill of Materials

- SERVO MOTORS x2

- BUTTONS x2

- ARDUINO BOARD

- PROTOBOARD

- RESISTORS x2

Step 2: Assembly

Step 3: Code

Step 4: PAN Video

Comments

author
locklarryup (author)2017-01-08

It's a Fake Instructable. i have taken apart many pan and tilt IP Cams that were broken and fixed them almost all of them had a belt drive similar to this one. the bad side to this design is it wont last very long and it becomes unreliable.

author
scratchndent (author)locklarryup2017-03-07

and it just needs a rubber band

so u could keep replacing

author
scratchndent (author)locklarryup2017-03-07

possibly but it would still work

author
R Jordan Kreindler (author)2016-07-11

Very Interesting. Thanks.

author
MatthieuR (author)2015-12-27

Step motors might be more precise and smoother.

author
jsushil (author)MatthieuR2015-12-28

you right, You have some idea how to make more smotther??

author
theoriginalrage (author)2015-12-10

There's not much to go by here. I made it on https://123d.circuits.io but it doesn't appear to do anything. You need to add more definition to this instructable. How does it work? What do the buttons do? Why is 1 servo connected to 5v and the other 3.3v? Hook us up with some content and answers.

author
bwh13 (author)2015-12-10

Slick video
Not much in the line of instructions though

author
DIY Hacks and How Tos (author)2015-12-09

Great looking pan tilt system.

About This Instructable

17,364views

117favorites

License:

More by jsushil:Panner with arduino
Add instructable to: