Print PDF
Favorite
Email
Step 5Attatching the pieces
- Take the first plane, and place a piece of tape on the middle front and back to hold the plane together.
- Place the second part of the plane on the ground with the flaps facing the table (upside down).
- Place the first part of the plane on it's wings on the table, on top of the second part.
- Try to center the plane as best as possible for the best possible balance.
- Start adding pieces of tape as the pictures show below...
- Place the second part of the plane on the ground with the flaps facing the table (upside down).
- Place the first part of the plane on it's wings on the table, on top of the second part.
- Try to center the plane as best as possible for the best possible balance.
- Start adding pieces of tape as the pictures show below...
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
16
Mar 13, 2010. 2:47 PMcharleszxc
says:
make more and tell me plz
Reply
 |
Add Comment
|
