Print PDF
Favorite
Email
Step 3Attach skin
Cut balloon or glove to get a piece of latex large enough to cover the bottom of cup.
Use tape (or your favorite adhesive method) to tack down the latex to the cup. Then seal up the latex to make an air-tight membrane over the cup (basically - make a drum).
Use tape (or your favorite adhesive method) to tack down the latex to the cup. Then seal up the latex to make an air-tight membrane over the cup (basically - make a drum).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
![How to Make a Full Auto Airsoft Minigun [Halo Inspired Mobile Turret]](http://img.instructables.com/files/deriv/FYY/GVFO/GQPNUR7E/FYYGVFOGQPNUR7E.SQUARE.jpg)
