Paper Glider

Step 10 The Rear Stabilizers and The Wingtips

First Let's Make The Rear Stabilizers For This We Need To Draw A Small Line(1/2 Inch) In Allmost The End Of OuR Glider's Tail (Depending On How Long You Want You Rear Tail Length (1 To 2 inch 1/2 Inch Is Best )
Now You Can Select One Of Two designs
1Classic Just Make A Simple Vertical Cut Like This
FuturiscMake A Enlarged "V" In The Tail (Don't Overcut)
See The Fourth Image For A Visual Reference

Don't Matter The Method You Have Choosen Fold The Piece Down Just Like In the Photo

Now The Wing Tips
Pick The Body Of Your Glider And Fold About 1/2 To The Center The Wing Tips Once They're Creased Raise The Wingtips So They Can Be Stable And Up

Repeat With The Other Side

Comments

[thebookworm127]

need to explain how far to cut into tail