Introduction: Paper Hand Crank
don't know anything about wood working arrived at the correct place
Step 1: Materials Required
- glue gun
- news paper
- cardboard box
Step 2: Making the Crank Peices
cut the news paper strips of 1.5 cm diameter and then role them and use about 9 strips of full length news paper to make 1 piece you need about 7 to 8 roles
Step 3: Making the Crank Box
cut a rectangle of dimensions 8 X 8 X 15 with one side open
Step 4: Make the Crank
make the crank by sticking the roles with the slight diversion
Step 5: Fixing the Crank
pierce the the holes and stick the wooden piece at the end of the crank at the axis.pierce the hole for every piece and put the earbud in the hole. now you have a fully functional paper hand crank
We have a be nice policy.
Please be positive and constructive.