Paper Kunai and Sheath Instructable

Step 2 Blade and Sheath

1. Fold one of the pieces of paper into fourths. Cut/rip.
2. Take one of the fourths and fold it in half along the line shown in the third picture
3. Fold the paper as shown in the fourth picture, using the middle line as a guide. It should look like the fifth picture.
4. Fold along the line in the sixth picture, again using the middle line as a guide. It should look like the seventh picture.
5. Fold along the line shown in the seventh picture(Yet again, using the middle line to help you. Don't you just love the middle line?). It should look like the eighth picture.
6. Make 3 more of these. In the end you should have four.
7. Put two of the triangles together as shown in the tenth picture. It should look like the eleventh picture. Tape together.
8. Make another of these using the other two triangles. You should now have two. One of these, you can set aside. It will be used as the sheath for the kunai. The other will be used for the blade.

Comments

[murtaza64]

while folding the paper hamburger (vertical) style, don't make the fold DIRECTLY in the middle, make the fold slightly off center to have a bigger sheath than blade and shave the top of the sheath off. this looks cooler.

[eggbert131]

ok