With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a marble run made from Paper and some Wire. It took me 4 week ends to completer it The marble run lasts approx 20 seconds We are going to us...
Take 4 pieces of A4 paper and roll them into tubes as thin as you can. Then join the 4 of them using duct tape.This is set A Make 3 set A's then join...
Make 4 set B's .
Take some paper and roll it into a tube then cut it into pieces of 3 cm .
Take your connectors and and put them as shown in the picture and connect all the set B's as shown in the picture Now you have a stand which looks l...
take some more connectors and attach them to the base as shown in the picture
Take some cardboard and put some glue on half of the cardboard and then take the other half and fold it on the side with the glue. Then make a small...
Put lots of glue in the hole in the base and then put the stand on as shown in the picture Then attach 4 paper tubes on the sides for support as sho...
Take paper and roll them into tubes and attach two of them side by side with a 1 cm space.Take 2 connectors and glue them on the edges of the tracks. ...
Take 2 straight tracks and 1 u turn track and join them together as shown in the picture Then attack it to the top of the marble run as shown in pict...
Now take your wire and make left turn tracks and place it around the stand slowly going downwards as shown in the pictures.
Make a zig-zag track as shown in the picture with the wire and attach it to the base as shown in the picture. Making support for the track and for th...
Make a U track and attach it as shown in the picture
Take 2 pieces of wire and attach them 1 cm apart then bend them into a L ish shape and then attach a straight track to it. Then attach this set to th...
Take 2 pieces of wire and bend them to the left and then to the right as shown in the picture and join them with a 1 cm gap in between them and glue ...
Then attach a straight track and then attach a U shaped track as shown in the picture.
Take some straight tracks and widen them up at the end and attach them to 2 walls as shown in the picture This is a go,fall,go,fall,go,fall track ...
Then attach the track you made in the before step to the base.
Make a mountainy track and then attach a straight track to it. Then attach a U shped track and another straight track to it Now make another u shape...
Note that this is an update on how to end the marble run in a different way. I made this update because I got 25 marbles yesterday so I changed th Y...
If you have any doubts on how to make any step please comment and I will give detailed instructions and the measurements on how to make that part PLE...
Take 2 9 V batteries and connect them to 4 LED's with their appropriate resistors.
Stick the setting on the marble run MAKE SURE THE FOUR LED'S COME ON THE SIDES AS SHOWN IN THE PICTURE!!!
These are some pictures of the shadow made by the marble run on my ceiling.
Take some cardboard and cut them as shown in the picture and make 12 of them
Join three of the pieces of cardboard and they should look similar to the picture Make 4 sets of these. Stick these four sets on the four edges as sh...
Take spray paint or normal paint and paint the whole thing. I painted it in silver because I though it will look good and I made a mess in my house. ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »