Step 3: Print

step two:

print out the 27 pages of the model.

dont worry, it uses a very veryy minimal amount of ink.

Keep them in order!! and keep them some place safe where they wont get creased ormolested in any way. i used a simple pocket folder.

Good job, but u can agree a little more dedications!!! and will be ok!! <br>
wait your saying that really long piece is all one piece?
yes, the long curved pieces are a single piece for the brim<br><br>in the pepekura program you can highlight the image of wheat was printed and it will show you the brim hilighted on the 3d helmet model<br><br>the best thing to do is print outeverything at once, cut out the little pieces around the brim that you need<br>and toss the brim<br><br>its going to take a good deal of time to make the brim how the program wants you to<br><br>save yourself the 10 hours of delicate work and nix the brim and sharpie it on
why dose the PDO file have like 5 or 6 pieces stuck together?<br>if its just me HALP!!!
yes the really long spidery pieces are supposed to be the eyebrow section<br><br>you can:<br><br>a) continue witht the helmet as planned but you would have to cut outall those super skinny pieces and wedges to glue with<br><br>b) like i did and just sharpied the eyebrow onto the helmet<br>i did not make the eyebrow piece because it is very complex<br> <br><br>and all it makes is a rectangle that arces above the eyes haha
so really its not needed?
thats a sweet starwars fact! thanks for checking out my instructable!
Those chrome thingies were microphones in the actual movie. In case one of the stormtroopers needed to talk, those holes were big enough to fit a mic inside.
Ohh, thanks a lot for this ^^ been looking for a pepakura ST for a while to go with my fem-armour as the bought ones are too big. Thanks again!<br /> <br /> The template can also be found here for those having trouble&nbsp; ^^&nbsp; <a href="http://myweb.wit.edu/jacksons2/Stormtrooper.htm" rel="nofollow">http://myweb.wit.edu/jacksons2/Stormtrooper.htm</a>
glad to help!<br />
&nbsp;put the link of this helmet
what?<br /> <br /> all the links are step one<br />
how do you find the template?
in step one, it says " download the stormtrooper template here. and the word "here" is in blue. click on the word and it will take you to the site i have it saved to. the site only has a short sentence on it, where you click another blue word and the template will download to your desktop. the file is a RAR file, so after downloading, use a program like WinRar to extract the file. (right click, extract here) then (if you have pepakura installed) open the extracted file with pepakura and there ya go.
hi . can you put the file here..? thx in advance
the files are on the step one page just read and follow the link, all the links work
sorry about that .. i speak little English ... BTW thx so much for the helmet, i was looking for this file long time .. i will post my pics of the trooper helmet and my head ..i finish my own head in pepakura and facegen..
Most people might have trouble learning how to do pepakura. (jez halo helmet only needs 21 pages) other than that thx.
i tryed to describe the use of the program in as much of a vernacular as possible. i found out about the program and dove right into this project with no prior experience without any help, so it shouldent be too hard for other "avarage joes" to pick it up the "halo" master chief helmet is much more boxy then a stormie helmet. when pepekura makes a modle of somthing it translates it into polygons. with the storm trooper helmet being exclusivly curved surfaces it makes it much more complicated, but not to the point of being hard. i have also made the master chief helmet and it is much the same difficulty, this project however, just takes more time. if you downloaded the stormie model, you can see that the "brim" part (the black stripe above the eyes) takes up alot of page surface. this is because its made in long winding strips, but in general volume sense the helmates use about the same amount of paper. the stormtrooper one is just 100X cooler thanks!
Do you know of a similar program that is mac compatible?
If you look in step six, I believe he is running Pepakura on his mac.. :D
nope, his laptop has two mouse keys. and the program won't open on my mac ):
you can use any mouse with a mac...
I'm way late on this argument but in step 6 in the first pic you can see the windows sticker in the bottom left corner
lol what I was saying was his computer has two mouse keys, and macs only have one; therefore, he is not running the program on a mac.
no, thats not a sure fire way to know. you can get a mouse that has two click features (or more) and stil run OSX. just walk into staples and look around, the right click just doesnt do anything.
right click works on macs. if you dont have a 2 button mouse, hold control and click and you get the right click menu thing.
he is saying that his laptop itself has two keys. there is no mouse involved here.<br/><br/>Also nice job on the mask =p<br/>
it appears to be an IBM thinkpad. I'd also be interested in a mac or linux version
im sorry, i do not. =[<br/>
the design is very detailed. Amazing! My question is how did you fit your head through it? lol. I'm almost done building and the opening is very small.
hello , and thankyou for replying! very good question, i completly for got to mention that. haha, i updated step 9 under EDIT any other questions i would be happy to answer please send me pictures of your helmet when your done!
Do you think the helmet would be strong enough if I just make it out of paper and not poster board?
to use as a helmet? no the paper wont beable to hold up when you use the filler on it. it would collapse on itself, sorry! if you have a budget to buy a good deal more poster board, you can cutit into 8.5X11 sheets and print on the posterboard.
this would be easyer stronger and better looking if u hade used poster board, fiber glass sheets and epoxy resign
yes, your correct. but this is not a "fiberglass stormtrooper helmet" its a "paper stormtrooper helmet"
i believe the zune in the step six picture can be the deal breaker, its not a mac haha
unfortunately, I'm not really running a mac. its just a very elaborate skin. sorry mac users!

About This Instructable


47 favorites


More by pocdragon: Playable BMO costume How to make darn near anything run on USB! Paper Stormtrooper Helmet
Add instructable to: