Introduction: Paper and Stick Helicopter

Picture of Paper and Stick Helicopter

You will need a piece of paper and a small stick, and a scissors/blade to make a slit in the stick

Step 1: Cut an Approx 3cm X 20cm Strip of Paper From a Notebook

Picture of Cut an Approx 3cm X 20cm Strip of Paper From a Notebook

Step 2: Fold the Paper Strip in Half

Picture of Fold the Paper Strip in Half

Step 3: Spread Out the Folded Strip in a V Form and Flatten It

Picture of Spread Out the Folded Strip in a V Form and Flatten It

Step 4: Fold One of the Arms of the V Downwards

Picture of Fold One of the Arms of the V Downwards

Step 5: Repeat on the Other Side

Picture of Repeat on the Other Side

Step 6: Unfold the Folded Arms Partially

Picture of Unfold the Folded Arms Partially

Step 7: Take a Small Stick and Make a Slit at One End

Picture of Take a Small Stick and Make a Slit at One End

Step 8: The Slit

Picture of The Slit

Step 9: Wedge the Paper Into the Slit, If Stick Flexible Enough Then No Need for Glue

Picture of Wedge the Paper Into the Slit, If Stick Flexible Enough Then No Need for Glue

Step 10: Throw It Out of a High Building or Just Throw It Upwards

Picture of Throw It Out of a High Building or Just Throw It Upwards

Comments

About This Instructable

563views

5favorites

License:

More by sujitp81:Paper and Stick Helicopter
Add instructable to: