Introduction: Paper-clip Shooter

Picture of Paper-clip Shooter

First of sorry about pictures I had no camera when I made this.
Materials you will need:
1 rubber band
1 paperclip(I used a small one)

Step 1:

Picture of

Step 1:
take the paperclip and straighten it out.Leave the hooked end in.

Step 2:

Picture of

Step 2:
Hold the paperclip so that the hooked end is facing left.Then grab the hooked end and bend it to the right so it is in line with the body of the paper-clip.

Step 3:

Picture of

Step 3:
Bend it again so that the opening is facing the right along the body of the paper-clip.

Step 4:

Picture of

Step 4:
Stretch the rubber band between your thumb and index finger,so that it makes a loop.Put the rubber band's two loops into the hook of the paper-clip and pull back.It has a good range,accuracy and is fast.Hope you enjoy my first instructable.

Comments

mikeasaurus (author)2012-06-25

Hey, this is a great instructable and is very informative. Just one thing is missing... pictures! It really helps a lot when trying to follow directions so you should consider taking some photographs. Once you do that leave me a message so that we can publish your work.

Thanks for the cool instructable and we hope to publish this soon!

mikeasaurus (author)2012-06-14

Hey, this is a great instructable and is very informative. Just one thing is missing... pictures! It really helps a lot when trying to follow directions so you should consider taking some photographs. Once you do that leave me a message so that we can publish your work.

Thanks for the cool instructable and we hope to publish this soon!

About This Instructable

License:

Add instructable to: