Instructables

Paper Airplane Walkalong Glider

Featured
Picture of Paper Airplane Walkalong Glider
What's a walkalong glider? Here's a video of a completed paper airplane walkalong glider on a 42 second "cross country" soaring flight:


This paper airplane design was fabricated from 100% reused materials, from the 8 1/2 X 11 sheet of paper to the 96cm X 75cm corrugated cardboard salvaged from the trash. this is a good way of reusing paper and cardboard before ultimately recycling them. Ever wanted to pilot an airplane? Here's a way to do it without electricity or contributing to global warming- this aircraft model is powered by you.

The surfer paper airplane is designed to fly as a walkalong glider. Paper airplanes are heavier than other walkalong glider designs and fly correspondingly faster. A 96cm X 75cm piece of corrugated cardboard was used as a controllable slope to power (sustain) and control the surfer paper airplane. For other walkalong glider designs see the Controllable Slope Soaring page.

The Indoor Paper Airplane Surfer has many improvements over this design. That didn't stop somebody from flying this design at the Red Bull Paper Airplane Contest in Austria (see 1:28 into the video):
http://www.youtube.com/watch?v=i5WzCuCFGNU
 
Remove these adsRemove these ads by Signing Up

Step 1: Folding the Surfer Paper Airplane

The surfer paper airplane is made from a standard 8 1/2" X 11" sheet of paper:

The nose assembly is used for many other paper airplane designs which differ from this paper airplane walkalong glider design only in how the fins are folded. The nose assembly is similar to the trapezium paper airplane design (proceedure is same up to 2:42):

The nose assembly and first fin fold is the same as before 1:09 in the following video:

The last fold on each wingtip is what distinguishes this glider from the rest. This fold starts at the front where the first fin fold intersects the leading edge of the wing. Then the edge of the fin is lined up with where the first fin fold instersects the trailing edge of the wing. This fold results in the outboard wingtip having a reduced angle of attack relative to the inboard wing, a design feature called wing washout.
1-40 of 59Next »
ty1595 months ago

im so good at paper airplanes

delonzo11 months ago
It that made of printer paper
draketheawsome11 months ago
i cant get it to work. I don't know how or where to hold the cardboard or anything. when i let go, the plane stalls once, and then is soars away and falls to the ground in about 1 second.
could you make another how-to video a little slower and show the step you just did
pause the video
no the step itself was shown too fast
Does this video include the step you were wondering about?
http://www.youtube.com/watch?v=It_juQxkR8E
DEADMAU5FTW5 years ago
what was that thing in your hands?
It looked a lot like glass or plastic.(In the kid's hands)
 some string
there is no string
cardboard to keep an air flow so that the plane can keep in the air for a long time.
maybe it was a carboard,,,to control the wind,,powering up to the glider
shassan32 years ago
i made it a million times but it just loops back and hits my head
in your video, please go slower. Thanks!
I think that because of the choice of a denser type of paper, the stability of the glider was in danger, so he had to move quickly. Perhaps if we switched the main material with one like the material used for newspapers/waxed tissue paper, it would be easier to control. Also, we notice that in this design the author has decided not to cut the tail wedge section..overall, it seems solid.
what I really mean is the folding parts but thanks anyway :)
wat.3 years ago
WOW!!!!!!!!!!!!!!!!!!!!!!!!!! AMAZING!
MR.SAINT2354 years ago
IT WORKS!!!!!!!
MR.SAINT2354 years ago
I know how to make that!! All you need to do is know how to make the flat bed, then adjust the wings in that way!!!!
macrumpton5 years ago
If you made the glider out of wrapping tissue or condenser paper you would not have to run so fast. Also the wider the wing in proportion to it's length the more efficient it is (although beyond about 5 or 6:1 it runs into stability problems.
walkalongaviation (author)  macrumpton5 years ago
Yes, you're right, lowering the mass with a lighter paper would slow things down. I have made the paper airplane design from half size tissue paper but I still haven't finished design enhancements to lessen the pitch instability yet retain control about the roll axis for turns. The tumblewing walkalong glider design, for example, flies much slower because it requires no forward mass, so it has the lowest wing loading for a given paper.
Here's the best flight so far:

omg
It would be so cool if you could use a fan to blow against the cardboard to create an updraft that the glider could fly on without moving forward. When I was a kid in school we made these paper helicopters that you could hold over a radiator (they had these massive 10ft long radiators next to the windows) and the hot air rising would take the copters up to the ceiling and out into the middle of the room.
Cool! if you can remember how to make them, plz post them!
walkalongaviation (author)  macrumpton4 years ago
This is the function of a wind tunnel. Wind tunnels have vanes to smooth the turbulence coming off the fan blades.
walkalongaviation (author)  macrumpton5 years ago
Today I made an indoor paper airplane from a waxy tissue wrapping paper which came with a plant. It works very well. Lighter material is the way to go.
is smaller cardboard work too?
The size of the cardboard can be likened to the power of the aircraft engine, the larger the area the more wind is created. A good test of how efficient a glider design would be whether you can sustain it with your hands (or your head). The paper airplane designs are not very efficient (theirglide ratio is relatively low). The foam design has a much better glide ratio:

So, you could act as though you were using telekenesis? That would be so cool!
walkalongaviation (author)  The Jamalam4 years ago
telekenesis or not the attention required to fly using hands or head means no attention to where you're going!!!!!
u guys r confusing  oh and hey jamalam
casey321b5 years ago
do we just mess around with steering and flight or is there a video so i dont look stupid out in my driveway...
walkalongaviation (author)  casey321b5 years ago
This is the first attempt at a steerable paper airplane. The Indoor Paper Airplane Walkalong Glider is by far a superior design and avoids the pitch oscillations:
http://www.instructables.com/id/Indoor_Paper_Airplane_Walkalong_Glider/
This improved design was flown for 400m (3 minutes).
cool.......................
how could some body find a piece of cardboard that big!!!!
The cardboard used here used to contain a bicycle wheel. Larger area cardboard sheets are used to deliver new bicycles. Ask you local bike shop if they have any boxes they are recycling/throwing away.
owenebs5 years ago
argh! when ever I throw mine it loops back to me upside down or just downright crashes into the ground! please someone help me!
walkalongaviation (author)  owenebs5 years ago
this design has been improved upon in the indoor paper airplane instructable. If you still have trouble, post a photo of your completed paper airplane.
1-40 of 59Next »
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!