Paper Airplane Walkalong Glider

What's a walkalong glider? Here's a video of a completed paper airplane walkalong glider on a 42 second "cross country" soaring flight:

This paper airplane design was fabricated from 100% reused materials, from the 8 1/2 X 11 sheet of paper to the 96cm X 75cm corrugated cardboard salvaged from the trash. this is a good way of reusing paper and cardboard before ultimately recycling them. Ever wanted to pilot an airplane? Here's a way to do it without electricity or contributing to global warming- this aircraft model is powered by you.

The surfer paper airplane is designed to fly as a walkalong glider. Paper airplanes are heavier than other walkalong glider designs and fly correspondingly faster. A 96cm X 75cm piece of corrugated cardboard was used as a controllable slope to power (sustain) and control the surfer paper airplane. For other walkalong glider designs see the Controllable Slope Soaring page.

The Indoor Paper Airplane Surfer has many improvements over this design. That didn't stop somebody from flying this design at the Red Bull Paper Airplane Contest in Austria (see 1:28 into the video):
http://www.youtube.com/watch?v=i5WzCuCFGNU

Step 1: Folding the Surfer Paper Airplane

The surfer paper airplane is made from a standard 8 1/2" X 11" sheet of paper:

The nose assembly is used for many other paper airplane designs which differ from this paper airplane walkalong glider design only in how the fins are folded. The nose assembly is similar to the trapezium paper airplane design (proceedure is same up to 2:42):

The nose assembly and first fin fold is the same as before 1:09 in the following video:

The last fold on each wingtip is what distinguishes this glider from the rest. This fold starts at the front where the first fin fold intersects the leading edge of the wing. Then the edge of the fin is lined up with where the first fin fold instersects the trailing edge of the wing. This fold results in the outboard wingtip having a reduced angle of attack relative to the inboard wing, a design feature called wing washout.

Comments

[davtheman223]

could you make another how-to video a little slower and show the step you just did

[millju]

pause the video

[davtheman223]

no the step itself was shown too fast

[walkalongaviation]

Does this video include the step you were wondering about?
http://www.youtube.com/watch?v=It_juQxkR8E

[DEADMAU5FTW]

what was that thing in your hands?

[ice45core0]

It looked a lot like glass or plastic.(In the kid's hands)

[alexw2150]

cardboard to keep an air flow so that the plane can keep in the air for a long time.

[culepet]

maybe it was a carboard,,,to control the wind,,powering up to the glider

[bob2]

 some string

[i love aircraft]

there is no string

[shassan3]

i made it a million times but it just loops back and hits my head

[Air_Assassin]

in your video, please go slower. Thanks!

[rainxsin]

I think that because of the choice of a denser type of paper, the stability of the glider was in danger, so he had to move quickly. Perhaps if we switched the main material with one like the material used for newspapers/waxed tissue paper, it would be easier to control. Also, we notice that in this design the author has decided not to cut the tail wedge section..overall, it seems solid.

[Air_Assassin]

what I really mean is the folding parts but thanks anyway :)

[wat.]

WOW!!!!!!!!!!!!!!!!!!!!!!!!!! AMAZING!

[MR.SAINT235]

IT WORKS!!!!!!!

[MR.SAINT235]

I know how to make that!! All you need to do is know how to make the flat bed, then adjust the wings in that way!!!!

[Paperworker99]

is smaller cardboard work too?

[walkalongaviation]

The size of the cardboard can be likened to the power of the aircraft engine, the larger the area the more wind is created. A good test of how efficient a glider design would be whether you can sustain it with your hands (or your head). The paper airplane designs are not very efficient (theirglide ratio is relatively low). The foam design has a much better glide ratio:

[The Jamalam]

So, you could act as though you were using telekenesis? That would be so cool!

[walkalongaviation]

telekenesis or not the attention required to fly using hands or head means no attention to where you're going!!!!!

[charleszxc]

u guys r confusing  oh and hey jamalam

[casey321b]

do we just mess around with steering and flight or is there a video so i dont look stupid out in my driveway...

[walkalongaviation]

This is the first attempt at a steerable paper airplane. The Indoor Paper Airplane Walkalong Glider is by far a superior design and avoids the pitch oscillations:
http://www.instructables.com/id/Indoor_Paper_Airplane_Walkalong_Glider/
This improved design was flown for 400m (3 minutes).

[Street Soulja]

cool.......................

[Paperworker99]

how could some body find a piece of cardboard that big!!!!

[walkalongaviation]

The cardboard used here used to contain a bicycle wheel. Larger area cardboard sheets are used to deliver new bicycles. Ask you local bike shop if they have any boxes they are recycling/throwing away.

[owenebs]

argh! when ever I throw mine it loops back to me upside down or just downright crashes into the ground! please someone help me!

[walkalongaviation]

this design has been improved upon in the indoor paper airplane instructable. If you still have trouble, post a photo of your completed paper airplane.

[macrumpton]

If you made the glider out of wrapping tissue or condenser paper you would not have to run so fast. Also the wider the wing in proportion to it's length the more efficient it is (although beyond about 5 or 6:1 it runs into stability problems.

[walkalongaviation]

Today I made an indoor paper airplane from a waxy tissue wrapping paper which came with a plant. It works very well. Lighter material is the way to go.

[walkalongaviation]

Yes, you're right, lowering the mass with a lighter paper would slow things down. I have made the paper airplane design from half size tissue paper but I still haven't finished design enhancements to lessen the pitch instability yet retain control about the roll axis for turns. The tumblewing walkalong glider design, for example, flies much slower because it requires no forward mass, so it has the lowest wing loading for a given paper.

[walkalongaviation]

Here's the best flight so far:

[jib451]

omg

[macrumpton]

It would be so cool if you could use a fan to blow against the cardboard to create an updraft that the glider could fly on without moving forward. When I was a kid in school we made these paper helicopters that you could hold over a radiator (they had these massive 10ft long radiators next to the windows) and the hot air rising would take the copters up to the ceiling and out into the middle of the room.

[Shredder543]

Cool! if you can remember how to make them, plz post them!

[walkalongaviation]

This is the function of a wind tunnel. Wind tunnels have vanes to smooth the turbulence coming off the fan blades.

[rogers236]

I've made a paper plane before with almost the exact same design, save the last few folds which were only slightly different. I found that if I made a hard crease for its fins and then flatten then back out. Then the fins will only pop up a little bit. This helps prevent the dips in the plane's flight and causes a much smoother flight without the need to fan it. Nice 'ible btw

[rogers236]

I found that if I made a hard crease for its fins and then flatten then back out. Then the fins will only pop up a little bit. This helps prevent the dips in the plane's flight and causes a much smoother flight without the need to fan it.

Forgive my error in syntax. lol

Correction: I found that if I made a hard crease on the fins and then flatten them back out, the fins will only pop up a little bit and this helps to prevent the dips in the plane's flight, causing a much smoother flight without the need to fan it.

[vitruvian8807]

Very cool. I once made a flapping paper airplane. Only if I had saved it, it'll take me weeks to try and recreate it if I ever attempt to. I've also made planes that come back to you almost always, though I suspect they're not that hard to make.