With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
In this instructable I will show a few easy steps on how to make a 5 color key fob using paracord. For this project you will need: * 5 - different p...
After choosing your colors I would recommend fusing all cord ends before starting, this will prevent the inner strings popping out and will be easier ...
Take the 5 cords and clamp them into the plastic clip. It is optional to clamp the inner cord as well just try to arrange all the colors around the ce...
This is the knot pattern, start with one of the colors and make sure the last cord ends under the first one every round.
Here you have 2 options, if you didn't clamp the inner cord you can slide it into the first round of knots and thighten them around it.
You can see here the 2 options: one is in the clip after tightening the first knot and the other way works exactly the same, inner cord tighten after ...
Keep on until the desired length is achieved.
Almost finished, on this last step you can take off the plastic clip, cut all loose cord and fuse neatly and carefully. You can make a diamond knot a...
Here is the finished key fob. You can attach it to many objects as a handle.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »