With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This tutorial will show how to make a paracord bracelet fixture that can be used with or without side release buckles. As I began making more bracelet...
Tools needed: - Drill & drill bits - Saw - Screwdriver(s) - sandpaper (optional) - counter-sink drill bit (optional) Materials list: Quantity...
In order to reduce the amount of woodworking skills required and make the project construction easy and quick, my design uses parts of an angle diviso...
Saw the 1” x 4” board into one 22½” section (the base) and four 3½” blocks. Stack the base and 3½” blocks as shown in the photo. The grain of the wood...
Drill two pilot holes through the base and each of the top 3½” blocks. On each of the bottom 3½” blocks, drill the pilot holes only ½ way through – do...
Attach a cable clamp, a female end of a 3/8” side release buckle, a female end of a 5/8” side release buckle to the side opposite the markings on the ...
Attach a cable clamp, a male end of a 3/8” side release buckle, a male end of a 5/8” side release buckle to the 3½” block that doesn’t have the bolt i...
On the opposite end of the base, drill a ½” ‘dimple’ near the inside edge of the base. During storage and transport the dimple will provide a hole for...
I recommend all of the sharp edges of wood be “dulled” using sandpaper. Since I transport mine a lot I decided to round over the edges even more using...
Using a 3/8” bracelet as an example, measure the length around a person’s wrist – for this example I’ll use 8 inches. When making a bracelet a popular...
Record the marking on the slotted bar - in this case 57. In the future, each time we want to make an 8-inch bracelet using a 3/8” standard buckle by t...
Knowing the reference marks for both buckle sizes enables us to create a table of the bracelet sizes for these buckles. Simply lay a measuring tape be...
This is a table of sizes and markings for 3/8 and 5/8 buckles in our example. I then attached the chart to the fixture so it is always available.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »