Introduction: Paracord Comfort Handle
I was inspired to make this one day while I was carrying my archery target. I picked it up, and after walking with it for about 20 feet, I set it down, and noticed that there were some abrasion marks on my hands. The terrible handle on the bag was starting to cut into my hand. So i got out my paracord and got to it! Really, this could be applied to any handle, say on a backpack or laptop case.
Step 1: Materials
1. 10-15 feet of paracord depending on the size of the handle
2. A pair of siscors
3. A lighter
4. A measuring tape
5. 1 uncomfortable handle
Step 2: The Starting Braid
Find the center of the paracord, and loop it around the instde of the handle.Tie a knot to keep it in place
Take one strand and cross it over like so.
Take the other strand and thread it under the first.
Take the second strand and put it through the first loop.
Pull tight and repeat on the opposite side.
Continue with the knots. It should be looking like this.
Now that you have your finished comfort handle, you can carry your object without the risk of pain! Happy shooting! Or whatever your using the handle for.