Instructables

Step 5: Finishing the Necklace

Picture of Finishing the Necklace
Now this is the tricky part, take rope 2 and tie an over hand knot. Make it tight! Now cut rope 2 for fusing. Now, when I fused the rope I got the end hot enough so it was a liquid but not runny or on fire. I then took the side of my scissors and flattened the end of the rope. When you do this do it as fast as you can without being reckless. What you should have now are the ends of rope 1. Now, take the ends of rope 2 and tie an overhand knot with both strands. Now, cut and fuse the ends of the rope and....... You now have your very own paracord necklace!
 
Remove these adsRemove these ads by Signing Up
Tommi Potx3 years ago
Me like!! Must make!!