Introduction: Paracord Noose (Tutorial)

Step 1: Supplies

Just need a short strand of cord, I used para cord cause it was just laying around.

Step 2:

When you have the desired cord, make a "S" shape with it, like so in the picture above, then pinch the middle of the "S" like so in the picture.

Step 3:

Grab the free strand that's on the top and wrap it amongst itself and wrap until it won't wrap anymore, like so in the picture above.

Step 4:

Once wrapped to the end, fold the strand between the opening of the loop, like so in the picture. When done hold the end down and pull on one of the bottom strings until you see the loop get smaller. DO NOT pull on the strand that makes the free strand on top go down.

Step 5:

When you do so, tighten it down where it's nice and secure.

Step 6: Finished

Once tightened you have a finished noose!
I made this tutorial for a future one on how to make a double noose bracelet.

Comments

author
DuckTaper (author)2015-12-30

It's all fun and games till some kid gets strangled.....