A few weeks ago I had an important school project on a usb, the day the product was due I forgot the usb, I was so mad and i knew there was an eaiser way to keep track of your usb, so my friend and I came together and created the USBracelet, and have pionerered a business around it. If you would would like to buy one of these USBracelets go to http://www.mandarintechnologies.com/ . To make the USBracelet more stylish I incorperated paracord with it.

Step 1: What You Need

For thismproject you will need:
- A USBracelet
- Tape measure
- your two favorite colors of paracord

Step 2: Wrapping the Paracord

Start off by measuring about four feet of paracord, thenmlay it across the length of the bracelet. Now you will start the braid by taking right end of the rope and placing it over the bracelet then take the left rope and and place it over the right one. Take the left rope and thread it under the bracelet and place it throught the loop the right rope made, and pull it tight. Take the left rope and place it over the the bracelet then take the right rope and place it over the left rope. Now take the right rope and slide it under the bracelet and thread it through the loop that the left rope made, and pull it tight. Repeat this weave until you get to the end. Once you get to the end you can cut the ends and mealt the ends to finish it off.

Step 3: Finished

This will solve all your problems of loosing your usb . This is also a great way to stylishly carry aroud your usb, so jump on the bandmwagon of wearable technology, along with the 1000's of others. Remember if you would like a USBracelet go to http://www.mandarintechnologies.com/ to purchase one, for limited time if you buy 10 use the promotion code "SPRING" to get 10% off your purchase. so have fun wih this and post picturs of your creations using these bracelets.

thanks for viewing!