This tutorial will show how to make a paracord bracelet with a side release buckle. This can be worn as jewelry, and unlike chain, it allows you to store several feet or rope on your person at all times. When made on a larger scale, this can also be used as a dog or cat collar.

A reliable online source of paracord is the Supply Captain. They carry a huge selection of cord in colors ranging from army green to rainbow. For side release buckles I recommend Creative Designworks.

More projects, links, and knot references can be viewed on my blog page, Stormdrane's Blog.

Step 1: Materials

Picture of Materials

You'll need paracord, or equivalent 1/8" diameter cord, a tape measure or ruler, scissors, side release buckle, and a lighter (torch lighter works best). The amount of cord used can vary, but for this example we'll use 10 feet of paracord to start with. Actual amount of cord used for the bracelet is about 1 foot of cord for every 1 inch of knotted bracelet length. So if your wrist is 8 inches you'd use approximately 8 feet of cord.

1-40 of 686Next »
sixtrees5 years ago

Great job,  you inspired me to make one of my own. I didn't have a snap buckle though, so I modified mine.

Picture 688.jpgPicture 689.jpgPicture 690.jpgPicture 691.jpg
I love the loop, how did you do it?
 This looks great - do you have an instructable on how you did it? I can't work it out from the photos.
OK, I don't think I need to post a full instructable for my bracelet because I just combined two posted instructables. But I will tell you what I did.
Measure your paracord according to stormdraines version, but add 1 foot. Tie the knot that is in this version. http://www.instructables.com/id/In_and_out_Knot_and_loop_Bracelet/
So I started it like kcardwel's but instead of tieing it to furniture and using a seperate piece of cord, I braided it like stormdraine. The end part was a little tricky. I braided it to the end until there was only enough room to fit the two loose ends of cord through the loop. I had one slightly longer end so I used that one to form the loop for the  big knot, I think I tied a knot so the loop was in place. I then loosely wrapped the ends around the loop 3 times and then fed the cord through those loops (like a noose). I then pulled them tight and ran them down under the braids of the bracelet.  
Hope this helps :)

Wow that bracelet looks awesome u should make an instructable for that if you haven't already tell me when you do.
Zeke330i5 years ago
 Thanks for the great Instructable! I've been looking for a new collar for my Mastiff, Zeke, for a while now and thought the King Cobra stitch would look pretty good. I used 45' of Bright Red (wife's idea) 550 Paracord and a 3/4" side release buckle, both from Supply Captain (thanks for the link). I also re-appropriated a "D" ring from an old collar so I could hook a leash to him for walks. Using some extra 550, I made a few Chain Sinnet bracelets based on the instructions from your blog. Great stuff, thanks for posting. 
Survival Dog Collar1 002.jpgSurvival Dog Collar1 003.jpgSurvival Dog Collar1 008.jpgSurvival Dog Collar1 010.jpgSurvival Dog Collar 005.jpgIMG_1610.jpg

If your traffic isn’t leading to conversions then it’s not much use. Make sure
you have tools in place to track the conversions on your campaign, in as much
detail as possible, so you can see which tactics are working best.YouTube and
Facebook both have excellent analytics packages, get to know them.<a href="http://buylikesservices.com/buy-instagram-likes/">buy instagram followers likes</a>

MelissaP111 month ago
chloehall111 month ago

I've always wanted to know how to make this bracelet, know I do. I didn't know it was going to be so easy! Thanks.

My boyfriend used to make lots of bracelets and I know how passionate that could be. Keep you art alive! Cheers

davidwhitehouse made it!2 months ago
Thanks, just made this, looks awesome and i used a clip with a firesteel, striker and whistle on :)
AngelaH11 made it!3 months ago

Thanks! that was so helpful :) Now I just need more paracord...

Jlhmad6 months ago

Thanks for posting! I made it (don't have pictures at the moment) and think it is great. It is a survival bracelet, but not sure what it could be used for in a survival situation....

paracord is great for a lot of things shelter or improvised tool lashings can be tied into a harness for rapelling used for snares you can strip the shell and ise the small white cords to fish and much more
crogshockey5 months ago

You can use buckles off old bags/backpacks or dog/cat collars.

crogshockey5 months ago

This looks great - do you have an instructable on how you did it? I can't work it out from the photos.

tmichlovitch made it!5 months ago

Great project and simple to make. I had a lot of fun making it, thanks for the instructable.

mikauhsoj6 months ago
jarnney6 months ago

Took me a minute to get past steps 2 and 3. I didn't realize you weren't cutting until I saw the last pic then I understood. Very happy thank you!! I have an Army watch my wife got me when I left service and the Parcord watchband will be perfect for it!! Hoorah!!

techlover20156 months ago


LexiM6 months ago

I might make one like this.

sle5 made it!7 months ago
thanks for the ible!!!! it was fairly easy to follow. ill make a video of it next time!
grogan soldier made it!7 months ago
mine was loose just like I wanted, at first it was a little confusing but I figured it out quick enough. I love it.
Mr AbAk7 months ago

nice bracelet

Cool. You explained things very clearly..

CaraB28 months ago

Great instructions! Where do you all buy your paracord at? I buy my paracord at http://paracordyou.com, they have great prices.

davidbarcomb9 months ago

This is really cool. Thanks for sharing

jetamkadlec9 months ago
Perfect!! I've just made one!
mcrain1 made it!10 months ago

worked for me!

2014-10-19 18.17.58.jpg
jennifer.b.smith.980 made it!1 year ago

awesome instructions ty


nice, works well!

blue_phoenix made it!1 year ago

Definitely enjoyed making this one - melted a fluorescent green to a dark gray cord for some glow in the dark survival paracord fun!

photo 1.JPGphoto 2.JPGphoto 3.JPG
anasdad1 year ago

Nicely done!


anasdad1 year ago

Nicely done!


I have just started doing paracord projects & your website is
awesome. Things are clear & tell me just what I need to know. I am
enjoying this very much!

This looks great - do you have an instructable on how you did it? I can't work it out from the photos.

painrude1 year ago

mann, where will I find a buckle in my area , #Zimbabwe

Stormdrane (author)  painrude1 year ago

You can use buckles off old bags/backpacks or dog/cat collars.

jellyrollmorton made it!1 year ago


ggallimore1 year ago

Great help thanks for this instruct able :)

1-40 of 686Next »