Introduction: Paracord Survival Key Chain

Picture of Paracord Survival Key Chain

I was bored today so I started playing around with my para cord And I think I may have created a new weave.
I made a key chain out of the weave and I hope you like it.

Step 1: What You Need

Picture of What You Need

- 2 Strands of 3' of para cord
- scissors
-  A lighter
- a key ring

Step 2: Starting the Key Chain

Picture of Starting the Key Chain

Take the ends of the 2 lengths of para cord and melt them together with the lighter, and hitch the cord to the keyring.

Step 3: The Weave

Picture of The Weave

Bend the cord about 5'' away from the key ring and do one weave of the cobra weave (shown in my 2 colored para cord bracelet tutorial) to start the weave. In the pictures above you will see how to do the weave, do the weave over and over again until you get to the end.

Step 4: Finishing Up

Picture of Finishing Up

now that you are at the end you can cut off the excess cord and burn it with a lighter

Step 5: Finished

Picture of Finished

Now if you ever get caught in a survival situation with you car keys you can take this key chain off and have 6 ft of para cord handy 

Please favorite , vote, comment and subscribe to my channel.
Thanks, Above are some pictures of this key chain and some of my other para cord creations


greggoryssmith (author)2016-09-16

I'm a bit confused what's this got to do if you loose your car keys? can't get into cars with it?

SparkySolar (author)2014-10-23

Thank you for the nice instructable


SparkySolar (author)2014-10-23

Thank you for the nice instructable


SparkySolar (author)2014-10-17

very nice

Captain MacTavish (author)2014-02-16

Is that fake grass?

About This Instructable




More by smitty16:Diy Plyobox for Under $35Paracord for Days Paracord Lanyard
Add instructable to: