With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I purchased some glow in the dark paracord and thought it would be cool to wrap a flashlight with it. There has been plenty of times I haven't been ab...
Tools and materials needed: 1 AA LED Maglight 2. 7 feet of glow in the dark 550 paracord (www.supplycaptain.com ) 3. Scissors 4. Lighter
Start out by tying a clove hitch on the bottom of the flashlight. Position the knot at the end of the flashlight and tighten the knot. Leave about a...
Rotate the flashlight and begin half hitching. Bring the cord to the top of the flashlight and make a loop Rotate the loop up and bring over the top...
Continue the half hitch process for the remainder of the flashlight. The spiral hitching will occur with each half hitch.
Make sure the flash light is in the off position (headlight full clockwise position) Tighten the hitching so that it will not impede with operation. ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »