Instructables
Picture of Paracord wrapping a knife handle

When I make a knife, I usually use micarta or wood for a handle, but sometimes I'll do a cord wrap.

When people think of a cord wrapped handle they usually think of a single color wrapped circularly around the handle, BORING!

 
So I decided to come up with a good way of mixing two colors for a wrap, this is the second knife I've made with this method, the first one was black and glow in the dark paracord. I was sitting in front of the tv, a knife in one hand, and some glowing and some black paracord in the other, I started messing around, and this wrap is what I came up with.

Hope you like it.

 
Remove these adsRemove these ads by Signing Up

Step 1: Supplies

Picture of supplies
You need:

ruler

paracord (2 colors)

lighter

multi-tool (or you can just get pliers, pointy pokey thing, and a knife for cutting cord)

Step 2: Cut and gut.

Cut the paracord into the needed lengths, I used 4' of each color, just remember that it's easier to cut off extra cord than it is to add cord.

Go ahead and gut the cord also, make sure any melted ends are trimmed and pull out the inner strands.

Step 3: Readying for wrapping

Ducttape the blade (I hate cutting myself while wrapping a knife).


Push an inch or so worth of cord through the starting hole. This is where we need to think this through. Whichever side you put the strands on, it will create a bump on that side, so I always put them on the inner grip side of the handle. The inner side of the grip is the side where you fingers wrap around, not your palm. It's more comfortable to hold it with the bump on the inner grip side, so I always put it there. 

Did that make sense? 



Okay, after you push the end of the cords through the starting hole, take a drop of superglue, and glue the ends of the cords down, this just helps keep them tidy and out of the way.  Just don't superglue your fingers together.

1-40 of 43Next »
ZooberEthan1 month ago

Where would I get a knife like yours to wrap? is it a kitchen knife?

I would like to make one so please respond!!!!

I have seen knives like this at my local sporting goods store and I believe at Walmart, again in the sports section. Some of these knives come in little kits with paracord and knife included. I personally would rather braid/build/forge my own knives and archery supplies. There is a certain quality found in the things one makes by hand that cannot be found in a store-bought product of the same nature, this is why I prefer hand made tools and trinkets.

oldanvilyoungsmith (author)  ZooberEthan1 month ago

I forged mine from a bar of 1084, and ground it out and Heat treated it.
I'm not sure where the best place to find a blade without a handle is. You can look on bladeforums.com and see if you can find a knifemaker to buy one from.

vdo314 days ago

I have a machete that had some cheap wrap on it, it doesn't have any holes for tying the cord though, the entire thing was wrapped and then glued at the ends, any idea how to wrap it this way if there are no holes to start or end with?

AharonH vdo3yesterday

I've had that "no starter holes" problem before, though not on a flat handle like these. Anyway, to solve this problem I typically use either a clove hitch or constrictor knot. Despite not having run into flat handles yet, I'm pretty sure that these two knots will do the job well and keep a low profile as well. Hope this helps!

Phoghat7 months ago
nice ible, clear and concise. Why resin though? leave cord free for emergency use
oldanvilyoungsmith (author)  Phoghat1 month ago

Because I was using a paracord handle because I like the look of them, and the grip they provide as a handle. If you leave them uncoated, the paracord becomes loose with use, gets very dingy and ugly, and on a non stainless steel blade (as this one is), when it gets wet, will cause rust behind the cord wrapping.

I'm not making this knife as an emergency survival knife or anything, I only like the look.

If you want to use a knife wrap as a survival cordage supply, I would suggest a wrap style that uses one very long length of cord, instead of two short pieces...

im not miguel4 months ago
used what i had...black and pink, still rocks!
temp_-2101531996.jpg

Looks good!

Is it possible to do the same thing without a starting hole near the blade. If so, would you have a photo to illustrat?.

If you don't have a starting hole, or don't want to drill one for some reason, my advice would be to start the same way I show here, but instead of going through the hole, put a twist in the two cords, and wrap them around the handle, ( I don't have any pictures unfortunately), then start tying the wrap like the tutorial shows.

you could just drill a hole.

Ryanoxpqz10 months ago
Top shot is one of my favorite shows!
JoMoFroBro1 year ago
Just out of interest, what brand of knife is that? I've been looking for a basic skeleton knife and have been considering the ka-bar ZK Acheron but that looks way cooler.
he made it himself, his website is: http://eagleeyeforge.com/ or his blog: http://eagleeyeforge.blogspot.com/
jestaq1 year ago
wear gloves
will i am933 years ago
why take the core out of the cord it makes it useless and if you are going carry the knife with you why not have the rope intact so if you need some rope you have it there
oldanvilyoungsmith (author)  will i am933 years ago
I'll just copy my reply to a similar earlier comment -

If I need cord, 4 feet of each color is almost useless.


The point of this handle is not for a survival wrap. If it were, it would be a solid color (so I would have more cord) and I would use a wrap that held more cord. This is for looks, pure and simple. The same as using wood, I don't put wood on a knife handle so I can start a fire with it do I? I keep 100 feet of paracord in my truck for an emergency, and I usually carry 25' with me in my satchel. That is useful in an emergency, two 4' sections are useless.

At least, that's my opinion, take it or drop it as you please. I've been known to be wrong before.
2*4=8', 8 feet of 550 paracord contains 7 strands of nylon thread. If you do the math that's approximately 56' of nylon thread, which could serve as a tripline, trout line, tether for a spearhead, or whatever you can dream up.
oldanvilyoungsmith (author)  arcstyles2 years ago
Once again, let me copy and paste.

The point of this handle is not for a survival wrap. If it were, it would be a solid color (so I would have more cord) and I would use a wrap that held more cord. This is for looks, pure and simple.
Ha...internet people....aren't they just so funny?
I've used a short strand of paracord as a shoelace when mine broke in the middle of a 25 mile hike. 4 feet of paracord can be a lifesaver if you're stuck in a situation like that.
Just imagine how handy 25 feet would be.
Well said....
I've actually found that spit, no I'm not kidding, can actually help to get the super glue off your fingers. I've done it a few times, and just kind of 'chewed' the remnants of it off, I can't stand the hard feeling that the glue gives your fingers/skin.
basicLaser2 years ago
LOL why do you have a picture of your wallet and some money with the knife? bling bling. Great instructable nevertheless
oldanvilyoungsmith (author)  basicLaser2 years ago
This knife wasn't made in my usual style, and the photography wasn't either. The knife was inspired by Mike Snody's work, and this is his photography style, so since the knife was a knod to him, I decided to do the same for the photos.
sonofstone3 years ago
being a beginner, my question is, why do you put resin on the paracord?
It's to seal the cord, it prevents water or other liquids from soaking into the cord and also makes the handle stronger. I don't usually seal the cord handles that I make, since the cord helps maintain your grip if the handle does get wet from something, I've only ever sealed the handles on my heavy duty work knives for durability or knives wrapped with a natural cord to prevent rotting, though for natural handles I usually use a natural sealant like shellac.
lakurfiss2 years ago
Duct taping the blade is a VERY good idea. I ripped my hand open one Friday night, cord wrapping a blade onto a spear handle. The folks at the local emergency room just couldn't get over it. ""you were making a ....SPEAR? Wow..." Twenty cents wort of duct tape would have saved me $1200. Live and learn.
A Dello3 years ago
You just failed son... Acetone (nail polish remover) dissolves Cyanoacrylate (superglue). Don't mess with the C5H5NO2 without it...
lol link3 years ago
i love survival knives and the outdoors so this is perfect
triumphman3 years ago
Nice contrasting colors, if you drop this in the thick brush, you won't lose it! Been there, done that! Keep up the good work. Nice 'ible ! Seek Peace & Joy, Triumphman.
dook3 years ago
Good Job Ser!
kilroy19583 years ago
Really nice work. I like very much.
Only thing I question, why put resin on cord? If you need the cord it is useless.
oldanvilyoungsmith (author)  kilroy19583 years ago
If I need cord, 4 feet of each color is almost useless.


The point of this handle is not for a survival wrap. If it were, it would be a solid color (so I would have more cord) and I would use a wrap that held more cord. This is for looks, pure and simple. The same as using wood, I don't put wood on a knife handle so I can start a fire with it do I? I keep 100 feet of paracord in my truck for an emergency, and I usually carry 25' with me in my satchel. That is useful in an emergency, two 4' sections are useless.

At least, that's my opinion, take it or drop it as you please. I've been known to be wrong before.
Nice work Sir
Mr.Sanchez3 years ago
That´s a Big Rock Forge Blade...?
Man I love Big Rock Forge blades. They're amazingly beautiful.
oldanvilyoungsmith (author)  Mr.Sanchez3 years ago
That is an oldanvilyoungsmith custom.

I forge and grind all my knives, check out my blog - eagleeyeforge.blogspot.com to see some of my other knives.

But I do know Scott (the guy behind bigrockforge) cool guy, and some GREAT knives, he's been an insipiration for at least one of my knives.
1-40 of 43Next »