Print PDF
Favorite
Email
Step 3Finishing the top
Now, when you put it first on your head, add or substract a card or shift several cards a little to adjust more precicely. You'll need a staple remover for this.
When done adjusting (it's important step - it'll be too late when you have whole thing done), remove one staple getting it back to flat form.
Then get a ruler and use it to bend a edge of the cards up. It doesn't really matter how much you'll leave for bending - it will only affect the size of the ventilation hole in the middle.
Now, when you bent the whole thing, you can connect last and first cards together to see how it'll look.
When done adjusting (it's important step - it'll be too late when you have whole thing done), remove one staple getting it back to flat form.
Then get a ruler and use it to bend a edge of the cards up. It doesn't really matter how much you'll leave for bending - it will only affect the size of the ventilation hole in the middle.
Now, when you bent the whole thing, you can connect last and first cards together to see how it'll look.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jun 15, 2009. 4:32 PMipwnumore
says:
what do u mean?
Reply
 |
Add Comment
|
