loading

Step 10: Magnets

  • Step 7

In this step we are going to place the magnets so that the door and the upper plate close the box.

On the base plate you need to place the magnets on each corner at 6 mm of the sides.

And you need to place a magnet on the inside of the door. And also inside the box.

TIP: hang the first magnet in the inside of the box, but with the other magnet onto it. So that you can check if the magnets are on the wright place. But than also glue on the backside of the second magnet.

looking interesting
what is you cnc laser machine ?
<p>I need to ckeck it in school</p>
What other patterns can be done with this?
You have a pattern to make 3 lines on the glass. Another with 2 lines ans the last is also with 3 lines but the distances of the lines are different.
<p>You can see the 3 patterns on the photo</p>
<p>?? what ???</p>
<p>mmm how to say that... good work! but all theses efforts just for 3 lines on a glass (limited to a specific size, impossible to use it with a larger or other shape ?) Is this pattern has a particular meaning ?</p>
<p>The pattern maker can use more glasses</p>

About This Instructable

3,853views

21favorites

License:

More by Jay Bytebier:Pattern maker glass Storage Box Buzz fire 
Add instructable to: