Introduction: Pen Gun

This is a simple fun project i hope you enjoy.

Step 1: Materials

-tape
-pen
-rubber band
That all

Step 2: Assembly

- 1 Take apart the pen.
- 2 Tape the cap to the body of the pen as is shown.
- 3 Slip the rubber band over the cap.
- 4 Load the center.
- 5 Enjoy.

Comments

author
inoname (author)2014-06-17

You have made it good but it not fires to far check out mine at https://www.instructables.com/id/pen-gun-15/fires ink cartrages up to 80 feats.

author
inoname (author)2014-06-17

You have made it good but it not fires to far check out mine at https://www.instructables.com/id/pen-gun-15/fires ink cartrages up to 80 feats.

author
inoname (author)2014-06-17

You have made it good but it not fires to far check out mine at https://www.instructables.com/id/pen-gun-15/fires ink cartrages up to 80 feats.

author
inoname (author)2014-06-17

You have made it good but it not fires to far check out mine at https://www.instructables.com/id/pen-gun-15/fires ink cartrages up to 80 feats.

About This Instructable

603views

5favorites

License:

More by little genius:Fix A Beyblade String LauncherPen Gun
Add instructable to: