Introduction: Pen Gun

Picture of Pen Gun

The finished product.

Step 1: Step 1

Picture of Step 1

You first need a pilot G-2 07.

Step 2: Step 2

Picture of Step 2

Unscrew the top part from the bottom part.

Step 3: Step 3

Picture of Step 3

Remove all of the stuff on the inside.

Step 4: Step 4

Picture of Step 4

Set up the pen as shown on the picture.

Step 5: Step 5

Picture of Step 5

Use the ink stick included with the pen to push everything back until you hear a click.

Step 6: Step 6

Picture of Step 6

Place the ink stick in the center and screw on the top to disguise the pen gun.


inoname (author)2014-06-16

is a good one but not fires to far check out mine at

fires ink cartrages up to 80 feats

Master Wasi (author)2014-02-01

where is the ammo?

alex888 (author)Master Wasi2014-02-01

the ammo is really anything that fits in the barrel

About This Instructable




More by alex888:Bubble BlasterstylusPen Gun
Add instructable to: