Introduction: Pen Shooter

This is my second instructable.I am going to teach you how to make a pen shooter,which is easy to use.One pen shooter can be made within 15 minutes. It has a range of 25 feet or more.NOTE:I am not responsible for any harm caused.Do not aim at face and eyes.Please vote for me in the Launch it contest

Step 1: Materials Required.

Here is a list of things required to make a pen shooter:
1. 1 refill
2. 1 empty pen
3. 1 pen cap
4. 1 staple pin
5. few rubber bands

Step 2: Method.

Take the pen cap and pass a rubber band(A) through it .Then tie some other rubber bands,such that rubber band(A) does not come out.

Step 3:

Take the empty pen and attach the pen cap with other rubber bands in such a way that they are on top of each other.

Step 4:

Take a staple pin and attach it's one end to rubber band(A),and bend the other end to 60 degrees approximately.

Step 5:

Pull, the rubber band with the staple and make sure it is held by the end of the pen.Put a refill in front,it will be caught by the staple pin.Pull, the refill with the pin and release.BOOM!The refill is launched!You have completed your pen launcher! Don't feel shy to comment. Please vote.

Step 6: Have Fun!Enjoy

by- Aakash Mansukhani

Comments

author
Emperor Towhid (author)2014-11-10

It is really easy to make .I wanna make it .I thought this also shoots well

author

you can try it any time it hardly takes an hour to make one if you have all the proper materials!!!