Step 6: Prepare to Pour!

When your surface is ready, prep your area for pouring the epoxy. You need someplace you can leave it undisturbed for about two days, and that is relatively dust-free. We set up in a back room of our house.

Cover the floor with lots of heavy plastic - very, VERY, important - as the epoxy will be dripping down to the floor - and set your desk top on some sawhorses or other stands, making sure that the edges are free.
<p>with epoxy it looks like you used some kind of penny foil</p>
<p>Awesome Job done. :)</p>
<p>That is awesome, thank you ! :)</p>
NIce job and good use of the penny. Makes cents.
Pun intended? <br>
How did you bend the coins around the edge after they were super glued? I've been trying to do this project, and ended up using a vice and hammering the coins over, which gave some really unreliable results.
I think they were bent first and then glued onto the rounded front of the table edge. The ring was used as a form and the vicegrips were used to bend the coin to fit the curve of the ring, so they all were an identical radius bend.
Thanks for posting this inspiring Instructable. I was thinking of doing one with lego bricks. Do you think that would work, or do you think the Lego &quot;studs&quot; would prove to be problematic? For example, would it require multiple coats of the resin? Would multiple coats of resin work well? (if needed) <br> <br>Keep up the good work!
Hmm. Well, the resin is self-leveling, but the LEGO studs are fairly shallow, so I *think* the resin would still cover them. A second layer of resin would certainly do the trick, though, if there are any pokey-parts sticking out. <br> <br>Another option is to build up the sides of your surface with wooden or metal trim, almost like a tray, so that the resin will pool inside and not drip over the edges. That way you'd get a nice smooth table top in one application. <br> <br>I hope you'll post a photo if you try this; I'd really love to see it!
Find a penny, pick it up..... <br> <br>Hey look, I just found 3500 pennies...
I thought you (the creator AND the viewers) might like to look at this if you enjoy this project. These people did basically what she did here, but with their kitchen floor tile! <br>http://www.curbly.com/users/diy-maven/posts/6849-tiled-penny-floor
You might want to do this. The penny will be phased out in Canada in late 2012.
Beautiful Job !<br>
Thought you'd like to know. TL;DR: It's against the law.<br>http://answers.google.com/answers/threadview?id=426715
Incorrect. it is not against the law. its only against the law to &quot;deface currency&quot; is there is an intent to defraud.<br><br>this is why where's george stamps are legal and why penny smashers are legal and why making &quot;coin jewelery&quot; is legal and why this table is perfectly legal.<br><br>Please stop propagating that myth.
Thanks for pointing this out, nerys. I initially had a paragraph in my intro about the legality of coin craft, but then took it out because I didn't think it'd be an issue here. Guess I was wrong! (It still amazes me how many people think this could be illegal with all the penny smasher machines out there.)
Well you don't need to use pennies; you could use buttons, old playing cards or any other small things. They could work.
you wouldnt do thi table because it againt the law?<br>use in an open space, use a respirator and common sense. use safly.
It's against the &quot;law&quot; to deface currency... and I am SO going to do this for a small table... in Mexico! lol... I think I'd be safe from prosecution here. ;-D
I voted for you, too bad your going to prison for life! Just kidding! I love when nameless, faceless experts on all things come out of the wood work. I hope the feds don't throw the book at you!. Someone said they are going to make a frame, that seems more practical for me.
I hope you looked through the pennies first for old wheat/ Indian head pennies lol
I did! And then I mixed them in at regular intervals throughout the desk. :D I also planted a Bahamian penny right smack in the middle. (It's the same copper color, but with a pretty starfish design.)
nooooooooo! those are worth money!! :P I hope there werent any rare ones cause imma be sad lol
Me, too, ctrejo! I used to have a HUGE collection of wheat pennies, as well as some 1942 lead pennies. My older sister broke open the container and put them all thru a coin-star machine, and ...poof! ... gone. BROKE MY HEART!! I've forgiven her, though. :o)
Okay, everybody who's jumping on the OMG This Is Illegal train. Chill.<br><br>Have you never dropped 2 quarters and a penny into a little hand cranked machine? It's a rolling mill which imprints an image of some particular attraction onto and squished and elongated penny. These machines are ALL over the country, at various attractions large and small, there's even one on an overpass north of Chicago that prints and image of the skyline. Brookfield Zoo, the San Diego Zoo, most museums, every amusement park in existence, including both US Disneys have these little souvenir makers. Do you actually think Disney would put itself at risk from the Federal Government over a squished penny?<br><br>The deal is, you cannot melt them to recycle the metal, so as to extract the value of the metal from the coin. And these days, it really wouldn't be worth trying, anyway. The micro thin copper coating of a zinc blank doesn't melt, it burns. Impressively.
It depends on the country. In Canada, it is actually illegal to deface the coins. Those little machines use blanks instead of pennies.
Okaaaaay...<br><br>The blogger lives and writes in the US. And not even one of the US/Canada border states. Not even a US/Mexico border state. So, it's pretty much a given that the laws in question are US laws. I'm saying the the blogger in question is not breaking any US laws. No disrespect to Canada or anything, but totally meaningless to the discussion.<br><br>Personally, I think Canada has the right of it. If you allow something small, it's harder to stop something large. But, in the US, what the blogger in question did does not violate any laws, anymore than the rolling mill coin smashers do.
awesome! got my vote.
ohh look!! a penny!!
where, I can't find it
I will do this with pennies from the year my Wife and I were born.....1972.
Good luck. JK
Pennies before 1982 were 95% copper and 5% zinc, and are worth approximately 2.5 cents (see www.coinflation.com).
Perhaps I will do a frame for one of our wedding pictures.<br>
A picture frame! That's a great idea! One could also make a frame for a baby shower gift! Love that!
That's a brilliant idea! About how big is the frame?
That's for the pure copper value.<br><br>This goes back to the legality of removing the coins from circulation without a permit from the Feds...
Say What?
The older pennies are worth more as copper scrap than they are as currency, but it is illegal to destroy them without a permit from the government.<br><br>From what I understand, there is a large community of people that are trying to get permission to legally remove large quantities of 95% copper coins from circulation so they can sell them for the copper value. They actually trade rolled coins for their copper bullion value as if they were ingots...
How many pennies will you have to go through in order to get the amount you need? How big a surface are you going to cover? I'm just thinking it will be a challenge to get that many pennies of the same date. I'm not knocking the idea, because it's an unbeleivably cool twist on the instructable. Do you have a trick for getting all coins of a certain date?
And, by the way...<br>anybody realizes that it is not legal?<br>it is a inappropriate use of money
it is not illegal. such a concept is a myth. the law regarding defacing currency ONLY applies if there is an &quot;intent to defraud&quot; since there is no intent to defraud anything here there is NO VIOLATION of the law.
hahahaha myth?!?! only with defrauding intention?!?! INFO: nobody is owner of money <strong>but State</strong> Nobody can stops money and may allow free circulation, always and ever... It is a lot of chapters before. But, anyway, I am not american... do what ever you want!!! even to interprete laws as you want, as seen.<br> <br> regards
Yes, myth. This has been settled law in the American court system for well over a century. Please restrict yourself to posting on topics on which you have at least a modicum of knowledge.
yes myth. the secret service and the courts have confirmed it.<br><br>of course this is regarding US LAW only. I have no clue about other countries.
Think of it as a true patriot trying to deflate the massive inflation created by the federal reserve. What they're doing is wrong, this is just a cool desk.<br><br>The key word from the section below is fraud. I'm not saying that the current administration wouldn't raid the authors home and throw him in prison for doing something that hurt nobody, but traditionally making things out of money has not been treated as a crime. I think if some one tried to mass produce these there might be a problem, but making one for use at home should keep you under the radar.<br><br>United States Code<br>TITLE 18<br>PART I<br>CHAPTER 17<br>&sect; 331. Mutilation, diminution, and falsification of coins<br><br>&ldquo;Whoever fraudulently alters, defaces, mutilates, impairs, diminishes, falsifies, scales, or lightens any of the coins coined at the mints of the United States, or any foreign coins which are by law made current or are in actual use or circulation as money within the United States; or whoever fraudulently possesses, passes, utters, publishes, or sells, or attempts to pass, utter, publish, or sell, or brings into the United States, any such coin, knowing the same to be altered, defaced, mutilated, impaired, diminished, falsified, scaled, or lightened&mdash; Shall be fined under this title or imprisoned not more than five years, or both.&rdquo;
&quot;Whoever mutilates, cuts, defaces, disfigures, or perforates, or<br>unites or cements together, or does any other thing to any bank<br>bill, draft, note, or other evidence of debt issued by any national<br>banking association, or Federal Reserve bank, or the Federal<br>Reserve System, with intent to render such bank bill, draft, note,<br>or other evidence of debt unfit to be reissued, shall be fined<br>under this title or imprisoned not more than six months, or both.&quot;<br><br>18 U.S.C. &sect; 333 : US Code - Section 333: Mutilation of national bank obligations<br><br>Ain't no &quot;fraudulently&quot; in that....
Being that you are quoting the statute re: paper money, one wonders what your point is v&iacute;s-av&iacute;s this thread.<br>Your purpose for posting is even more difficult to understand considering that the proper relevant statutes were already posted above. To wit:<br><br>TITLE 18 - CRIMES AND CRIMINAL PROCEDURE<br>PART I - CRIMES<br>CHAPTER 17 - COINS AND CURRENCY<br><br>-HEAD-<br>Sec. 331. Mutilation, diminution, and falsification of coins<br><br>-STATUTE-<br>Whoever fraudulently alters, defaces, mutilates, impairs,<br>diminishes, falsifies, scales, or lightens any of the coins coined<br>at the mints of the United States, or any foreign coins which are<br>by law made current or are in actual use or circulation as money<br>within the United States; or<br>Whoever fraudulently possesses, passes, utters, publishes, or<br>sells, or attempts to pass, utter, publish, or sell, or brings into<br>the United States, any such coin, knowing the same to be altered,<br>defaced, mutilated, impaired, diminished, falsified, scaled, or<br>lightened - <br>Shall be fined under this title or imprisoned not more than five<br>years, or both.<br><br>There most certainly IS &quot;fraudulently&quot; in that.<br>Again, the idea that altering coins for non-fraudulent purposes is illegal IS A MYTH.

About This Instructable


879 favorites

More by Epbot: Portal 2 Inspired Lemon Grenade (With Sound!) Penny Desk!
Add instructable to: