Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I'm making a penny farthing, and it's going to be rad. I had already begun construction when Tim and Star convinced me to post an instructable about i...
Dramatization! Not actual footage! So, I took a 4' diameter tabletop that was kicking around, and drilled a 1/2" hole near the side, and tied a bit o...
Isn't it great! Star thinks so!
Here is the seam in the rim. I welded the outside and inside using a mig welder, and then ground down the welds. If you're going to grind down your we...
I took 6' of 3/8" steel rod, inserted the end into a hand brake with 1.5" sticking out, bent, then chopped 1.5" off after the bend, thereby making the...
So, I found a bunch of these. They seem to be feet from some optical equipment (or so Tim says). So, go find some :-P
I made a small jig for them by drilling two screws into a small piece of plywood, and mounting the plywood onto the drillpress so when the piece was p...
I found this piece of thin-walled steel tubing that just happened to fit snugly into the hub sides. I drilled out two small holes in it to line up wit...
I'll get to the crank spindle later, but for now, just insert the steel tubing between the two sides, and throw some bolts into the threaded holes. T...
I bought from some company online a lot of 3/32" stainless cable, 100 thimbles (the little tear-drop shaped things), and 100 brass ferrules. For my ri...
still working on it
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »