Print PDF
Favorite
Email
Step 8Connect GNDs and PWRs to the rails
Now it's time to start actually connecting our leads to PWR and GND. I will use the power rails going down the board to my advantage and take leads from there.
**The way I am connecting these pins in this example is for tutorial purposes only. I want you to see exactly what I am connecting to where. If I were making a board for my own use, I would make these connections underneath the board directly to the power rails in the center. This can save lots and lots of space, but would be very hard to understand and follow in this tutorial. That being said, you can copy this exactly, and your circuit will work great! Just not the most space efficient method - get creative!
**The way I am connecting these pins in this example is for tutorial purposes only. I want you to see exactly what I am connecting to where. If I were making a board for my own use, I would make these connections underneath the board directly to the power rails in the center. This can save lots and lots of space, but would be very hard to understand and follow in this tutorial. That being said, you can copy this exactly, and your circuit will work great! Just not the most space efficient method - get creative!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
