With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
So I spent the last few months traveling for work, and found I was getting frustrated lugging around cables and all the various peripheral boxes for m...
The first step was to measure and cut the lexan, alas I did this by hand and did a rather poor job with keeping the edges straight (however most of th...
I then started taking the peripherals out of their cases to establish proper alignment;As I had suspected when I was first gathering supplies the CF r...
After the CF reader was figured out, I went to work on the hub;I decided I was going to hardwired three of the components and leave an open plug for f...
I decided to retain two removable plugs, The first making it a bit easier to get into the box in the future, and the second because I still may use t...
At this point I had enough components far enough along to start putting things together and drilling mounting holes.I found a small interference probl...
After basic fitment was finished, I started connecting the devices to one another. For the most part I tried to use ribbon cable to keep things organi...
After all the electrics checked out I finalized the support locations and cemented them to the case. After witch I drilled/tapped pilot holes through ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »