Print PDF
Favorite
Email
Step 3Cut channels
First thing's first, we are going to need to make a 1/4" deep channel in each of the 36" x 6" boards.
Clamp your board to a work surface. Next clamp a guide parallel to one edge, such that you will cut the channel 1/2" in from that edge. Set your saw to cut 1/4" deep and make the cut.
Repeat on the second board.
Clamp your board to a work surface. Next clamp a guide parallel to one edge, such that you will cut the channel 1/2" in from that edge. Set your saw to cut 1/4" deep and make the cut.
Repeat on the second board.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
