Personalized wire hanger for baby clothes

Step 3 Make the hanger

Bend the wire

As you'll have guessed while drawing the word in your notebook; for some letters you'll have to make several pass that will have to overlap each other. One thing I've learned when making the hanger is to think in 3D. Your wire doesn't have to remain like on a sheet of paper anymore. If you look at the picture below; for the "M" of romane, I've bent the wire to the back (like if it would enter the sheet of paper) to go back up. The result is nicer.

Don't forget to measure your hanger on a regular basis so you 'll get something +/- standard that can fit most wardrobes. As I said, I was simply putting my hanger on top of the template one just to compare.

You can also make these little hooks on the side so it's possible to hang dungarees, dresses and so on...

Altogether it took me 30 minutes per hanger.

Hope this inspires someone

Have all a nice day

Comments

[deltagirl82]

Nice! How do you put the pvc on the hanger? Can you make a step illustrating this?

[chouf]

hi, the PVC coating was already on the wire. As explained, I went to a DYI shop and found this one in the gardening area. It's supposed to be use to build drying lines. I suppose you could also use any other wire for garden fences. These are always coated with plastic...