loading
the glass bit is the front element from a fed 60mm lens i think, the body is an old ross something, its basically a tube with a narrow bit in the middle and its got a m39 mount that slides on the body, i added a 39 to 42 adapter, the test shots were done with a 550d canon . apsc sensor. so on full frame the picture edges should get 'nicer'

let me know if you want to see inside the lens!
taken with my fujian mash up cam
<a href="https://www.instructables.com/id/prktica-fujian-multilens-mash-up-its-a-messy-one/" rel="nofollow">https://www.instructables.com/id/prktica-fujian-multilens-mash-up-its-a-messy-one/</a>&nbsp; similar digital results with this one<br> <a href="https://www.instructables.com/id/steampunk-film-camera-christmas-special/" rel="nofollow">https://www.instructables.com/id/steampunk-film-camera-christmas-special/</a>&nbsp;<br> and a film one that looks the part.

About This Instructable

844views

4favorites

License:

Bio: the a b c approach is not for me .all feedback welcome. thanks for looking. if you would like some assistance or are interested in ... More »
More by crazyg:Valentines Day Special,Ozone Fart Remover, Rechargeable Gas Hob Igniter,UV Generator,  Chocolate Saddle  LAZER GUIDED GOLF BAT CLUB RACKET PUTTER 
Add instructable to: