Introduction: Phat Phat Boat
Hi guys i am Kishor from kaggalipura makerspace, today i will show you how make Phat phat boat by using old trash items.
Step 2: Take a Tin
Take a tin and cut it as shown in the image.
Step 3: Measurement
Then take a scale and mark it height 18cm and width is 6cm as shown in the image.
Step 4: Use M Seal
Take m seal then stick the tin as shown in the image.
Step 5: Straw
Take to straw stick it with the help of m seal then put the straw inside the sealed tin as shown in the image.
Step 6: Body
Take the thermacol and cut it like a boat shape then give the good finishing with the help of sand paper as shown in the image.
Step 7: Finally
Take wood peaces and sealed tin and fix them to the boat body, finally the paht phat boat is done then you can take a peace of candle and put it on the wood plate then you can test it in water.
We have a be nice policy.
Please be positive and constructive.