Step 6Congratulations!
Now with your Sweet Photo-BioReactor and your algae expertise, all you need is a lid and your ready to start your aquaculturing!
Glue any remaining loose components in place.
Then Glue the Lid Inserts onto one side of the lid. These will hold the Water Bottles together, while keeping out contaminates and stopping too much water from evaporating and the salinity from rising.
Once you are sure that you dont have any leaks, you can insert the airpump and glue in the bottom panel of the reactor's base.
Now step back and marvel at your Awesome, and Green in more ways than one, PhotoBioReactor!
Not only are you reusing waste material (plastic water bottles) but this reactor will also actively scrub CO2 out or the air, while being a cool conversation piece when you have guests over. Imagine the possibilities if an inclined individual were to build in some sweet LED Grow lights...
More instructables to come on what you can do with 4 litres of bioluminescent algae-
| « Previous Step | Download PDFView All Steps | Next Step » |
![]() |
Add Comment
|












































