Introduction: Photo Electric Alarm Using the KY-010 Sensor

Picture of Photo Electric Alarm Using the KY-010 Sensor

Hello world! i made a simple example on the KY-010 Photoelectric / Photointerrupter sensor.

Follow the next step for the code schematic and parts list.

Step 1: Schematic Code & Parts List.

Picture of Schematic Code & Parts List.

Wire it up like the Schematic, upload the code and it should work.

Parts list:

  1. Arduino Uno, I used the RobotDyn Uno.
  2. KY-010 Photo Electric sensor.
  3. KY-016 RGB Led or any other leds will do.
  4. Buzzer
  5. Jumper wires.

Good luck!

Comments

About This Instructable

482views

8favorites

License:

Bio: Hello world! I make simple & Advanced projects for people who want to learn programming and electronics. Most of my Instructables are about arduino and the ... More »
More by vandenbrande:ARDUINO - SOLID STATE RELAY FAN/ventilator Control Using the W1209 Thermistor and SSR-25 DA Arduino - SSR-25 DA Solid State Relay and DS3231 RTC Automatic Timer Lamp Arduino & C# - RGB LED / LED STRIP CONTROL C# Application
Add instructable to: