Introduction: Photo Frame
This is a Photo Frame I made with 123D design. I got this idea while someone just broke a nice photo frame, so i thought lets make one that is cost customizable. So I used 123D Design to create a customizable, better and more durable Photo Frame. the photo frame is based an a standard Photo of 13x9cm of 9x13cm (5.1''x3.5'').
I do not have a 3D printer so i can not tell you how long it will take to print this but i think about 2 to 4 hours.
If you like this project, please vote for it in the 123d Autodesk project. Also, make sure to download 123D Design application at http://www.123dapp.com/design.
Step 1: Fromat of the Photo
13cm x 9cm
Step 2: Making the Outside Shell
Step 3: Making the Photo Gab
Step 4: Choose of the Photo Groove
Step 5: Photo Frame With in Groove
slightly smaller then the real photo
Step 6: Making the Stand Up for Long Photos
Step 7: Made the Groove for the Stand Up
Step 8: Making the Photo Frame Ready for the Second Groove (long Photos)
Step 9: Aligning the Stand and Photo Frame
Step 10: Made the Groove
Step 11: End Result
We have a be nice policy.
Please be positive and constructive.