Introduction: Photo Sensing Iron Man Face

Makers : Harish and Kushal

Location :Banjarapalya E4D Maker space

We made this project at Banjarapalya E4D Makerspace, For the Instructables Build Night On Circuit Scribe. We enjoy this build night so much and it's really cool.

Materials:

1. Conductive pen

2. A4 sheets

3.Photo sensor

4. NP N Transistor

5. LEDs

6. Buzzer

7.9v Battery

Tools:

1. Pencil

2. Eraser

3. Blade

4. Stencil

Step 1: Draw the Iron Man Face

First draw the Iron man face on the A4 sheet Neatly with the help of pencil.

Step 2: Plan the Circuit

Plan the circuit on another A4 sheet, and draw the circuit with the help of conductive pen.

Step 3: Fix All Components

After completing the circuit you must take LED's, 9v Battery, Battery Adopter, Photo sensor NP N Transistor ,Buzzer and fix it to the circuit with the help of Steel pad.

Step 4: Put the Circuit Under the Drawing

Take the circuit and put it under the iron man drawing and make a hole where do u want to fix the photo sensor as showing in the photo.

Step 5: Your Photo Sensing Iron Man Face Is Ready

After fixing everything your Photo sensing iron man face is ready.

Step 6: See Video

See the video.

Comments

author
amberrayh (author)2015-03-31

This is really cool. Thanks for sharing!

author
sam soma (author)amberrayh2015-07-07

Thank you

author
Thayamma (author)2015-06-28

Really cool. thank you for sharing

About This Instructable

2,807views

41favorites

License:

More by kushal kumar:Air BoatTasty Pulao!  Potato and Cabbage Fry
Add instructable to: