Step 3: Step 2:. The foot
What you need:
Cut a 1þ piece of the electrical conduit. A tubing cutter works best.
Cut a 18" piece of parachute cord
1 EMT bushing
1 rubber tip
What to do:
Run the parachute cord through the short piece of electrical conduit then put the rubber tip on the conduit so it captures the parachute cord. Do this in such a way that the long bit of the parachute cord is to the outside. Add the EMT bushing to the end of the conduit.
The updated version does without the EMT bushing
Cut a 1þ piece of the electrical conduit. A tubing cutter works best.
Cut a 18" piece of parachute cord
1 EMT bushing
1 rubber tip
What to do:
Run the parachute cord through the short piece of electrical conduit then put the rubber tip on the conduit so it captures the parachute cord. Do this in such a way that the long bit of the parachute cord is to the outside. Add the EMT bushing to the end of the conduit.
The updated version does without the EMT bushing
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
