Print PDF
Favorite
Email
Step 2Drawing
Well this is pretty straight forward just draw out your design on the experiment PCB
Just follow this table, for the 16f676.. I have not checked it up but this may be the same for all 14pin pic16F***
ICSP connector function pic pin
1 MCLR/VPP 4
2 VDD 1
3 VSS 14
4 ICSPDAT 13
5 ICSPCLK 12
I did the mistake in this step not looking at my programmer, to see that the wires should be inverted, wire 1 moved to the top wire 5 to the bottom and so on. If you want to see your socket and pic programmer lights facing the same way. just be sure to draw it the other way or place the header pins facing right instead of left that will fix it to.
Just follow this table, for the 16f676.. I have not checked it up but this may be the same for all 14pin pic16F***
ICSP connector function pic pin
1 MCLR/VPP 4
2 VDD 1
3 VSS 14
4 ICSPDAT 13
5 ICSPCLK 12
I did the mistake in this step not looking at my programmer, to see that the wires should be inverted, wire 1 moved to the top wire 5 to the bottom and so on. If you want to see your socket and pic programmer lights facing the same way. just be sure to draw it the other way or place the header pins facing right instead of left that will fix it to.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
