Introduction: Pick Pendant

Picture of Pick Pendant

I have some veneer layers glued together left from a previous project and I got the perfect idea of what to do with it.

Here is my guide about how to make a pick pendant.

Step 1: Materials

Picture of Materials

You'll need:

- A saw.

- Sand paper and files.

- A pencil.

- Pyrography tool.

- Four veneer glued together left form the key chain project.

- An empty necklace.

- Varnish.

Step 2: Drawing

Picture of Drawing

If you don't have this veneer layers glued together apply to step 2 on this.

Draw the pick style and size you want.

Step 3: Sawing

Picture of Sawing

Saw carefully around the lines.

Step 4: Sanding and Drilling

Picture of Sanding and Drilling

Sand the rough shape you sawed and drill a hole on the top of the pick.

Step 5: Pyrographing

Picture of Pyrographing

Use a pyrography tool or a welder to design the pick.

Step 6: Finishing

Picture of Finishing

Coat the pick with varnish and insert to the necklace.

Go showing off with your new cool pendant.

Step 7: That's It

Comment your opinion/ questions.

Don' forget to vote.. :}

Check out my page here, my Facebook page and my YouTube Channel.

Comments

han solo23 (author)2015-04-25

how did you put the small hole for the string to ho through

crashzoom (author)han solo232015-04-26

With a small knife or a drill

About This Instructable

330views

6favorites

License:

Bio: I always liked making stuff and when my grandfather showed me Instructables I became an addict. I don't have any degrees yet but I ... More »
More by crashzoom:Burrito RecipeBentwood Metallic RingCandy vodka
Add instructable to: