Introduction: Pico-Power K'nex Gun Mod
The bigger and more powerful version than the first one. It shoots 20 feet or more and uses 15 pieces! It's a fun gun to build and shoot.
Pieces:
4 Orange/ Brown Connectors
6 Grey Connectors
2 Light Grey Connectors
2 Yellow Rods
1 White Rod
? White Rods for Bullets :D
Step 1: Body and Barrell of Gun
The barrell is strong, so don't worry about it breaking. Build the body and barrell just like the picture.
Step 2: Firing Pin
This is the workhorse of the gun. Use a Rubberband as shown. Stick the rod through the holes and put a loop of the rubberband on each sides of the orange connector.
Step 3: Firing!!!
Pull the Pin back and put the trigger in so that it blocks the rod from going through the barrell. Load in a white rod into the front of the barrell. Pull the trigger DOWN and it will fire!
Have Fun!