Print PDF
Favorite
Email
Step 11Cure & Demold the Rubber Mold
Allow the rubber to cure for at least 24-48 hours (or as directed in material instructions). To demold, unscrew the parts of the box mold and remove the rubber mold.
Turn the mold over so the base of the foot is at the top, and insert the blade of a utility knife into the side of the mold at the top at the until it reachs the plaster part inside. Start a cut and allow the knife to move (more creating a clean tear than making a cut) all the way around the mold in one continuous cut, splitting it into two halves.
Once it's in two parts, remove the plaster part.
Turn the mold over so the base of the foot is at the top, and insert the blade of a utility knife into the side of the mold at the top at the until it reachs the plaster part inside. Start a cut and allow the knife to move (more creating a clean tear than making a cut) all the way around the mold in one continuous cut, splitting it into two halves.
Once it's in two parts, remove the plaster part.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
