Print PDF
Favorite
Email
Step 7Hollow out a space for your mechanism
Hollow out some of the wood from within the outline you drew in Step 5.
Do not remove all the wood, but remove enough to house the clock mechanism so it sits flat within the carved area.
You should leave about 3 mm of wood. You can use the hole you made in Step 6 as a guide so you don't carve too much.
Do not remove all the wood, but remove enough to house the clock mechanism so it sits flat within the carved area.
You should leave about 3 mm of wood. You can use the hole you made in Step 6 as a guide so you don't carve too much.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
