Instructables
Picture of Pin book
c.JPG
IMG_5048.JPG
Pin book uses flexible bound paper to create a tidy space for storing little things.

Step 1: Materials & Tools

Picture of Materials & Tools
Materials:

1 Case bound magazine, not stapled!
1 Rubber band, or 2 if you're feeling adventurous.


Tools:

1 Metal ruler
1 X-acto knife, with a spare blade or two if you have it.
1 Pen/marker
1 Cutting mat (not pictured)
1 Drafting triangle (optional)


Step 2: Mark the bind

Picture of Mark the bind
3.JPG
4.JPG
Measure and mark  a line running parallel to the binding edge. This measurement will determine the height of your book. Next, break up the space you just created along the binding into even sections. This measurement will determine the width.  I used a 1" measurement for my height, and a 2" measurement for my width to yield five 1" x 2" sections. 

Step 3: Cut the block...nice and easy

Picture of Cut the block...nice and easy
6.JPG
7.JPG
Use your metal ruler and X-acto knife to cut the long line running parallel to the binding edge. Depending on the thickness of your magazine it will probably take between 10 -15 passes to get all the way through. Just take it nice and easy and you'll be through in no time. Once you've made the long cut you can go ahead and cut the smaller sections out, one at a time, nice and easy.

*The remaining unbound portion of your magazine may now be recycled, used as mailer packaging, or rolled up for use as a toy telescope.

Step 4: Band the bits

Picture of Band the bits
IMG_5034.JPG
Use a rubber band or two to join the individual sections you just cut out into a flexible block. 

Step 5: Book it

Picture of Book it
b.JPG
c.JPG
Store some little things. Pins, needles, paper clips, push pins, memos, business cards, guitar picks...etc, etc.
 
Remove these adsRemove these ads by Signing Up
Fikjast Scott4 months ago

this is very nice, great idea

spotyguy2 years ago
I've tryed but mine is dirty : (
timwikander (author)  spotyguy2 years ago
Hmm. Try popping in a fresh blade and giving it another go. It's surprising how much of a difference this can make.
Yes I've re-tryed and it's now clean thanks !
ilpug2 years ago
I just made one for my xacto knife blades, but I used a zip-tie in place of the rubber band, and tied it onto the edge of my work self so I have easy access. I wonder if this could be made on a larger scale with cardboard for files, knives, knitting needles, pens, pencil, brushes, what have you.
timwikander (author)  ilpug2 years ago
I was actually inspired by knife blocks while I was coming up with the design so it was cool to read about your use with X-acto blades. I like your mod with the zip tie and I have a few ideas for experimenting in a larger scale as well. Thanks for the comment!
This is great! Looks awesome too. :D
timwikander (author)  jessyratfink2 years ago
thanks!
spotyguy2 years ago
That look great , I'm gonna try
Kiteman2 years ago
Oh, this has given me an idea!