With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I‘d been scratching my head trying to come up with a card for my hubby {AKA the non-romantic type}. I finally decided to make him this pixely popup he...
Download the popup insert template and print out on to a sheet of paper or thin card. I used pink paper but you can use any color you want. Using some...
Place your piece of paper on a cutting mat (or a scrap piece of cardboard). Using a craft knife and ruler cut along the black lines (highlighted in ye...
Make the four valley folds as show in the image below (marked with thin yellow lines).
Make sure your card is still resting on a flat surface and s-l-o-w-l-y fold the top of the card inwards and the bottom half of the heart should begin ...
Make outer card and glue/tape popup insert inside. I just used a plain piece of paper which measured 9.5cm x 19cm and then folded it in half. I left ...
Print out the envelope template. Cut, score and fold! I also made some paper pixel confetti to add to the card!
Pop the card in the envelope and stick down. You can use glue or tape (or even some pretty washi tape). Happy valentines day everyone!!
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »