Print PDF
Favorite
Email
Step 4Making it
4.Set iron to dry iron and at a temp. above polyester and below rayon. (In my case it was level 3).
Then place iron on the wax paper but keep it moving, if you just leave it in one place it will burn through the plastic.
Keep heating the plastic until you think its done. Check it, if it crinckles then heat that area.But if it dosent, it should peel nicely off the wax paper.
Then place iron on the wax paper but keep it moving, if you just leave it in one place it will burn through the plastic.
Keep heating the plastic until you think its done. Check it, if it crinckles then heat that area.But if it dosent, it should peel nicely off the wax paper.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
