Print PDF
Favorite
Email
Step 10Making the Frame (Prepping the wood)
Center one piece of wood along the length of the matching side.
Use your pen or pencil to mark the approximate center of each bottle.
Do this for all four sides.
Drill pilot holes about 1 in from the edge on all four pieces of wood. If you want more stability, drill two holes for each mark. (you will need additional screws)
Pre-screw the screws into each pilot hole.
On the board that will overlap, drill two pilot holes at each end for the connecting screws.
Use your pen or pencil to mark the approximate center of each bottle.
Do this for all four sides.
Drill pilot holes about 1 in from the edge on all four pieces of wood. If you want more stability, drill two holes for each mark. (you will need additional screws)
Pre-screw the screws into each pilot hole.
On the board that will overlap, drill two pilot holes at each end for the connecting screws.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
